Many firearm enthusiasts say you should spend as much money on a quality scope as you did on the gun. That showcases the importance of a reasonable scope.
You can have the best rifle in the world, but you’ll miss the target every time if your optics are bad. It’s not ideal if you’re headed out for some big game hunting and only get one chance to bring home some meat.
But it’s not just a matter of buying a great scope. It also needs to attach perfectly to your rifle, so scope rings are essential. People spend all their time looking at scopes and spending thousands of dollars on a good one, only to find out they can’t even attach it to their rifle because they don’t understand how a scope ring works.
What Are Scope Rings, and Why Are They Important? A Guide
Want to avoid that problem? Read on below to learn all about the importance of scope ring height and size.
How to Mount a Scope
When you buy a rifle scope, you won’t be able to attach it to your rifle. First, your rifle will need to have an accessory mounting system in place.
The most common mount is the Picatinny rail system. This is especially true for those attaching scopes, as opposed to other accessories like lasers or grips.
Other standard mounting systems include the M-Lok or Keymod systems. Your mounting system comes first. Then, you need a way to attach your scope to the mounting bracket.
What are Scope Rings?
Scope rings are the components attached to your mounting bracket, usually Picatinny rails. These are mounted to the gun. The scope will then sit snugly inside these rings.
You’ll tighten the clamps in the rings, which secures the scope and prevents movement.
If you look at your rifle scope, you’ll notice the two ends have a much wider diameter than the centre. The scope rings latch onto the small diameter centre.
There usually are two rings to hold your scope in place. Some Picatinny scope rings will feature two rings affixed to a base. This simplifies installation, but you cannot adjust the rings independently if you want to increase the distance between the two rings.
For more control, especially with longer scopes, you can get two rings and place them on your mounting rails in your desired position. Space out the rings as much as possible to create a more secure fit.
And if you want to ensure maximum visibility around your scope, you can get see-through scope rings, which won’t block your field of view below the scope.
Understanding Scope Ring Size
Scope rings come in a variety of sizes, but there are three main ones you’ll care about. You’ll often see 1″, 30, and 40mm scope rings.
Some large ring sizes will have shims, allowing the rails to work with smaller scopes. But the best scope rings fit your favorite scope perfectly without the need for additional points of failure.
Don’t Overlook the Rings
Most people don’t think about scope rings. But they are a vital component of your rifle. Without them, you can’t attach your scope to your gun. And with bad or worn-out scope rings, your scope might move, ruining your chance of an accurate shot.
So don’t skimp on quality scope rings that fit your favourite scope.
Are you looking for more tips like this? Visit our blog now to keep reading.