4 Quick Ways To Check The Health Of Your Tyre

4 Quick Ways To Check The Health Of Your Tyre

Written by Deepak Bhagat, In Automotive, Published On
September 8, 2020
, 400 Views
Last modified on February 10th, 2023

A vast majority of people don’t consider changing their car until it completely goes bald or they experience discomfort in driving. Most drivers simply get the keys and get behind the wheel without giving much thought to the health of their car.

As a driver, you are responsible for the safety of yourself and your passengers. Bike Tyres are part of the vehicle which makes contact with the ground and ensure a safe drive. You can use bike-label to make your bike more attractive.

 

We Are Sharing 4 Quick Ways To Check The Health Of Your Tyre

 

Check Tread Depth

From maintaining the ideal levels of tractions to resisting against hydroplaning —tread depth is crucial for safe driving. To check the health of the tyre, start by examining the tread depth. If the tread in your tyres is damaged or the depth has decreased, it can be risky for it to grasp the street. And, when you drive in rainy conditions with these types of tyres — there is a risk that your car can completely lose control as the tyres lose their capacity to grip underwater.

Whether you live in the United States or not — getting a penny to test the tread depth of your car can save you a lot of time. Penny test is the most popular type of tread depth test around the world. You get an idea of the tread depth as you put the penny on the tread.

When you put the penny inside the tyre, keep an eye on the head of Lincoln. The penny must enter the tyre upside down and as you put it, if you can see the head of Lincoln, then you need to buy a new tyre.

Don’t delay the purchase of new tyres because driving on a tread depth less than 1.6mm can be quite dangerous. Also, avoid any route which can rock or other sharp objects as your tyre is more prone to punctures and blowouts.

You can also check for uneven wear in your tyre through the penny test. Uneven wear occurs when you don’t rotate your tyres properly and they are not properly aligned. Put the penny in different parts of your tyre and try to notice the difference. The tyre must cover the coin equally from every part, if not, then your tyre has worn out unevenly.

While you are doing the penny test, try to notice any cords or fabric stands. If you find any of these, then this may indicate that your tyre has gone bald or is severely damaged.

 

Look for cracks

Cracks start to show up on the outer surface of the tyres when it grows old. While you are doing the inspection, observe both sidewalls and tread of the tyre. It is normal for the tyre to have minor or small cracks but if the cracks are severe, you may have to replace your tyres. You can understand the severity of the cracks by closely looking at them. If you are able to see inside the tyre, then the cracks are intense.

 

Try To Notice Any Sharp Objects

Whenever the tyre rolls over a bumpy road or sharp objects, there is a chance that these objects stick with the tyre, especially if the tyres are old. Metals and nails usually get stuck on the rubber. The leak or puncture may not be obvious because the leak is not substantial as the object is still there. First look at the sidewalls and then on the outer surface. Notice any bulged area or cuts.

 

Tyre Pressure

Tyre pressure is another thing that is extremely important for secure driving. You can see the recommended tyre pressure level in your owner’s manual. Low tyre pressure can generate more heat with the road which leads to blowout and tread wear.

Similarly, over-inflated tyres don’t perfectly grip the tyre as the shape of the tyre is distorted. When your tyres are overinflated they are more prone to damage. So, before you hit the pedal, notice the tyre pressure and fill in the to the recommended level.

You can use these quick ways to check the health of your tyre. Top-quality tyres can last longer if you keep a check on their condition.

Related articles
Join the discussion!