Positioning Electrical Sockets And Switches In Domestic Buildings
It is important to properly position sockets and switches in domestic buildings, to ensure the safety of the occupants of the building, and also to allow the accessibility of people with limited reach as stated in Approved Document P of the Building Regulation. All electrical installations in a domestic building should be in alignment with the regulations found in BS7671. Here is a brief breakdown of how to become a certified electrician in California. Enroll in a state-recognized school or apprenticeship. Fulfill the required work and classroom hours. Pass your exams and become a certified journeyman electrician.
How To Position Electrical Sockets And Switches In Domestic Buildings
In this article, we provided a brief guide showing the correct positioning of the electrical materials in a building.
Socket Outlets
Every building must have a socket outlet, and to ensure the safety of the occupants of the building, you must ensure that you have a proper socket installation in London where the socket outlets are strategically placed for safety and convenience. According to the regulations, socket outlets should be placed close to telephone outlets and the TV aerial. This will allow the easy and safe connection of electrical equipment like Televisions and DVD players. Following standard procedures, each room should have the following number of outlets;
- Living room- 8 outlets
- Master Bedroom- 6 outlets
- Other bedrooms- 4 outlets
- Kitchen- 8 outlets
- Dining room- 4 outlets
- Landing- 2 outlets
- Hallway- 2 outlets
Electrical service and cabling
It is recommended that a suitable electrical service, with the right size for normal domestic use, should be provided. Cables should not be placed diagonally. Also, when cabling, ensure that cables covered with PVC are not in contact with polystyrene insulation.
Cooking
All cooking appliances placed around the cooker space must be switched suitably and also must be terminated with at least a 30A electricity supply. In cases where a cooker panel is present, it should be placed on the side of the cooker space. At the cooker space where a gas supply is provided, a 13A socket outlet should be properly positioned.
Light Fittings
There should be at least one fixed light outlet in all rooms. For areas more than 25m2, at least two fixed light outlets should be provided.
The hallway, staircase, and landings should have light outlets and two-way switches. For ceilings that serve as acoustic insulation or provide some kind of fire resistance in a building, there should be no flush fittings attached through such ceilings. For ceilings that are below roof voids, if downlighters are attached to them, extreme care should be taken to ensure that the closeness of other materials does not lead to an outbreak of fire or fire-related accidents.
Also, passive infrared should be used in common and external areas.
All the regulations relating to the positioning of your electrical appliances are put in place for safety purposes. It is important to adhere to them completely. For your correct electrical positioning in London, you can contact Electric Works London. Our expert electricians can conduct a wide range of installation services, including Switch installation in London. You can reach us by calling 020 71834006, and we will respond to you ASAP.
